DIGITAL YACHT LTD
Aqua PC Quick Start Guide
Installation Step 3
On the rear of the Aqua PC is a single black cable that has eight wires. This is the Power/IO cable. Connect the
Red (+) and Black (-) wires in the Power/I
O cable to the ship’s 12v DC supply.
Ensure that the supply is connected via a suitable fuse or suitable circuit breaker (in the positive power
connection).
A 5A fuse/circuit breaker is recommended for most installations and 10A is the maximum value that
should be used.
Do not try to turn on the Aqua PC yet.
Installation Step 4
The connections on the rear of the Aqua PC are as follows;
The wires in the eight core Power/IO are as follows;
o
RED
-
Power + (12v or 24v)
o
BLACK
-
Power
– (0v)
o
ORANGE
-
COM 1 TX+
o
YELLOW
-
COM 1 RX +
o
GREEN
-
COM 1 Ground (-)
o
BROWN
-
COM 2 TX+
o
BLUE
-
COM 2 RX+
o
GREY
-
COM 2 Ground (-)
Connect a USB mouse and keyboard to the any of the four USB ports on the Aqua PC
Connect a suitable monitor or monitors to the VGA and/or HDMI connectors on the Aqua PC
If you wish to connect any USB devices that have rechargeable batteries i.e. iPhone or need extra current i.e.
external hard drive of DVD player, connect them to the Yellow “High Power” USB sockets.
The DC Input Jack connector should not be used. Please ensure that the supplied protective cap is
always fitted and do not attempt to connect any devices or external power supplies to this connector.
