OSD Menu
_
Day & Night (CONT.)
2
If COLOR mode is selected, the camera’s display will always appear in color, regardless of the
lighting condition.
COLOR
3
- BURST : Select to enable or disable color burst when the camera switches from color to B/W.
- IR SMART (0~15) : Enable Smart IR and set the level. Higher values will make SMART IR stronger.
B/W
4
The Day & Night settings are set according to a CDS sensor in an external IR LED board.
- D
→
N Delay : Set a delay for the camera when switching from day to night mode.
- N
→
D Delay : Set a delay for the camera when switching from day to night mode.
- EXT LED : Auto : The LEDs are enabled/disabled by the CDS Sensor on the LED Board.
OFF : The camera’s LEDs are disabled manually.
- NIGHT S/W : Based on the CDS settings in the external LED board, set the value for LOW/HIGH.
EXT
22
