Installation-
Instructions
1
To detach the camera’s cover dome from the camera’s
module press the small buttons located at the sides of
the cover dome.
While pressing the buttons, disconnect the cover dome
from the camera’s base module.
2
Use the camera or mounting template to mark and drill
the necessary holes in the wall or ceiling.
3
Pull wires through and make connections.
4
Using the two included screws, mount and secure
the camera to the wall or ceiling.
5
Adjust the camera’s Pan and Tilt.
6
Use the joystick to adjust the OSD menu.
7
Snap the camera’s cover dome to the camera base to
complete the installation.
11
