1
If BLC is selected, adjust the size and position of the mask :
- Level : Set the BLC levels LOW/MIDDLE/HIGH
- AREA : Use the joystick controller on the camera’s board to adjust the zone’s position.
Press the enter key and use the joystick controller to adjust the zone’s size.
- DEFAULT : Return the BLC settings to their original default values.
BLC (Back Light Compensation)
2
HME allows objects to appear clearly on the screen by masking extre-
mely bright areas.
- SELECT : The camera supports up to four different HME zones.
Select which zone to setup.
- DISPLAY : For the selected zone, select ON to adjust its position and
size. Use the joystick controller
on the camera’s board to adjust the zone’s position. Press the enter
key and use the joystick controller to adjust the zone’s size.
- BLACK MASK : Select whether the HME mask will display in black on
the camera’s view.
- LEVEL : Set the working range of the HME. The higher the value, the
HME mask will appear only around bright sources. Set the value from
0~100. Default value is 20.
- MODE : Select whether the HME mask will appear during night mode
only or all day. If the zone is set to night mode, the zone will appear
based on the AGC setting value.
- DEFAULT : Return the settings to their original default values.
HME (Highlight Masking Exposure)
OSD Menu
_
Backlight
MAIN MENU
LENS
MANUAL
EXPOSURE
BACKLIGHT BLC
WHITE BAL ATW
DAY&NIGHT AUTO
NR
SPECIAL
ADJUST
EXIT
SAVE&END
BLC
LEVEL
MIDDLE
AREA
DEFAULT
RETURN
RET
HME
SELECT
AREA1
DISPLAY
ON
BLACK MASK ON
LEVEL
----20
MODE
NIGHT
DEFAULT
RETURN
RET
POSITION
19
