Dwell Time: Select the Dwell Time from 0 to 99 seconds. The default is
10 seconds.
Speed: Adjust Pan/Tilt/Zoom Speed if you want to a slow movement.
The defaults are maximum Speed.
Delete Position: If you want to remove Tour position from Tour Position
Setup list, select the desired Tour Position, and click the Delete Position
button.
Set Position: Click the Set Position button, then show the stored Presets
on the drop-down list.
Follow steps below to program the Tours:
1. Click the desired Tour position of Tour Position Setup list, and click the Set Position
button, then show the saved Presets on the drop-down list. Click a Preset.
2. Repeat step 1 for each desired position.
3. Click ‘Save’ to save the settings, or click ‘Reset’ to clear all the changes.
5
3
