Page 8 of 36
OSD Functions
Image
Brightness
Increase/decrease brightness level.
Press – or + (- + ) Total : 100 steps
Contrast
Increase/decrease contrast level.
Press – or + (- + ) Total : 100 steps
Sharpness
Increase/decrease sharpness level.
Press – or + (- + ) Total : 8 steps
Color
Auto : Auto RGB Calibration ([See appendix V] in details)
(Function in ARGB mode only)
Color temp
4
(Adjust the warmness of the image displayed. The higher temperature the
coolest image looks like. The lower temperature the warmest image looks like.)
4200k
5000k
6500k
7500k
9300k
User
4
R Press – or + (- + ) Total : 100 steps
G Press – or + (- + ) Total : 100 steps
B Press – or + (- + ) Total : 100 steps
Reset
Gamma (0.4/0.6/1.0/1.6/2.2)
Display (Function in ARGB mode only)
Auto Adjust
Auto adjust the positions, phase, frequency
Phase
Fine tune the data sampling position (adjust image quality)
Press – or + (- + ) Total : 100 steps
Clock
Adjust the image horizontal size
Press – or + (- + ) Total : 100 steps
Display Position
Adjust image position
Backlight**
4
Invert
B/L Invert : Invert for the backlight brightness
Control
D/A / PWM : Selection for voltage level dimming control / PWM dimming control
Frequency
Backlight frequency 100 ~ 440Hz in a step of 20
B/L
Backlight brightness adjustment
Sound
(Function when HDMI and Display Port connected and selected)
Volume
Increase/decrease volume level, total: 100 steps
Press – or + (- + ) Total : 100 steps
Mute
Mute
Output
Select audio output port
Speakers : via CN1 & J1 connector
SPDIF : via CN11 connector
System
4
Input : Select the input video signal
Display
Port
VGA
DVI/HDMI
Autoscan : Enable the Auto source seek function
Timer : OSD Timeout in seconds
Press – or + (- + ) From ON, 5 to 60 (Total : 13
steps, ON standard for Always ON)
