Page 14 of 36
Pos #5
Pos #6
Pos #7
Description
OFF OFF OFF
WUXGA
ON OFF OFF
UXGA
OFF ON OFF
SXGA
ON ON OFF
WXGA
OFF OFF ON
XGA
ON OFF ON
SVGA
OFF
ON
ON
VGA / WVGA
ON ON ON
Others
SW1 Pos 8 = Reserved.
DIP switch selection – SW2
Pos. #
Function
Description
1
Panel pixel format
OFF : Double Pixel
ON : Single Pixel
2
LVDS data mapping select
ON : Mapping A (LVDS panel)
OFF : Mapping B (LVDS panel)
Please adjust to get the correct picture. See as Appendix IV for details of
mapping A and B.
3 Reserved
Reserved
4
Operating mode selection
OFF : General application
ON : Work with RM-DN5 (firmware version E1.12.10a) from HDMI port
#
The most current list can be found the controller solution generator at
http://www.digitalview.com/controllers/csg.php
Remark :
# Assign SW2 position 4 to ON for connection to RM-DN5 (Firmware version : E1.12.10a) from HDMI port with the following
changes :
- Add “Loading…” message on screen while startup and stay until the valid signal.
- Changed the default Auto Source Seek to Off
- Changed the IR key from "Display" key to "OSD Next" key for menu function
- Extend longer delay time approx. (4 secs) to detect signal for "No Signal" state
- Only HDMI input and disabled all other "Source" selections in OSD, IR hotkeys & RS-232 for RM-DN5 mode
