Rev A April 2011
Page 4.47
Digital Projection
TITAN WUXGA 3D, Dual 3D, 330. 660
User Manual
4. Controlling the projector
For important information about how Input 8 is used, see
INPUT 8 in the Notes column
, and also Section 4, Overview.
Notes
Setup Menu
On Screen Display
The On Screen Display will
move to the centre of the DMD
when Blanking is turned On.
(see Geometry menu, earlier in
this section).
If a menu is opened, and no
other key is pressed within the
period set in the OSD Timeout
menu, then the menus will
disappear. When the
key
is pressed again, the menus will
reopen at the same point they
were last viewed.
On Screen Display
Press
and
to select On Screen Display.
Press
to open the On Screen Display submenu.
OSD Position
Press
and
to select OSD Position
Press
and
to select from:
Upper Left
Upper Centre
Upper Right
Middle Left
Middle Centre
Middle Right
Lower Left
Lower Centre
Lower Right
OSD Size
Press
and
to select OSD Size.
Press
and
to select from:
Large
Small
OSD timeout
Press
and
to select the length of the On Screen Display Timeout.
Press
and
to select from:
0 to 255
in 1 second steps
(when set to zero, the OSD never times out)
•
•
•
•
Setup menu continued
Downloaded From projector-manual.com Digital Projection Manuals