Digital Projection
Titan Quad & Titan 800 Series
A TOUR OF THE MENUS
Operating Guide
Op 18
Rev F November 2012
Input Configuration
This menu allows adjustment of various technical parameters specific to each of the signal inputs,
regardless of which input is being used.
•
DVI Boost EQ
should normally be set to
Off,
except when you are having problems with a long DVI
cable.
•
DVI / HDMI Color Space
should normally be set to
Auto
, except when the projector has problems
identifying the correct colour space.
•
DVI / HDMI Range
should normally be set to
Auto
, except when you are having contrast problems
with some DVI sources.
•
Set
DVI-I Port
to choose between the
Analog
and
Digital
signals from a DVI-I source.
•
DVI Main Operation
Select between single and dual link DVI reception.
•
DVI Main Range
Select between
Full
and
Limited
range.
•
Set
Component Colour Space
to choose between
RGB
and
YPbPr
.
•
Component Sync Type
should be set to
Auto
, except when the projector has problems selecting between
3 Wire
(RGsB) and
4 Wire
(RGBS).
•
If two video streams are being transmitted, use
3G-SDI Level B Stream
to choose between the two streams.
Notes
Main Menu
Setup
Input Configuration
