Digital Projection
Titan Quad & Titan 800 Series
A TOUR OF THE MENUS
Operating Guide
Op 5
Rev F November 2012
A Tour Of The Menus
Main menu
•
Input Selection
Select an input source from the drop-down list.
•
Test Pattern
Set
Input Selection
to
Test pattern
and then select a test pattern from the drop-down list.
•
Lens, Image
,
Color
and
Geometry
Open these sub-menus to access various picture and screen settings.
•
Edge Blend / PIP
PIP
and
Edge Blend
are mutually exclusive modes of operation. When the projector is in Edge
Blend mode (as shown in the picture), PIP is not available, and vice versa.
•
3D
Access 3D settings.
•
Lamps
Select lamp configuration and adjust lamp power.
•
Setup
Adjust Input Configuration, Network, On Screen Display and System settings.
•
Information
View your current configuration
Notes
See also
Using the Menus
earlier
in this guide and
Menu Map
later in
this guide.
Main Menu
You can also select an input source
by pressing the following buttons on
the remote control:
1
to
9
for
inputs 1 to 9,
10+
for input 10 and
#
for input 11.
Test patterns are subject to image
controls, so brightness, contrast
etc. will affect their appearance on
screen.
Do not use the provided test
patterns for P7.
You can upload custom test patterns
using a network connection - see
Web Configuration Utility
later in
this guide.
The 3D menu is not available with
2D projectors.
