Digital Projection
Titan Quad, & Titan 800 Series
OPERATING THE PROJECTOR
Installation and Quick-Start Guide
Inst 7
Rev F November 2012
Adjusting the lens
The lens can be adjusted using the
Lens
menu, or:
Zoom
•
Press
followed by
and
to adjust the size of the image on the screen. When the adjustment is finished, press
.
Focus
•
Press
followed by
and
to adjust the focus. When the adjustment is finished, press
.
Shift
•
Press
followed by
,
,
and
to adjust the position of the image on the screen.
When the adjustment is finished, press
.
Adjusting the image
Orientation and On-Screen Display settings
•
These can be set from the
Setup
menu.
Keystone
•
This can be set from the
Geometry
menu.
Picture
•
Settings such as
Brightness
and
Contrast
can be set from the
Image
menu.
•
You can also set
Brightness
,
Contrast
or
Saturation
by pressing
,
or
on the remote control.
Notes
When any of the three lens
adjustment keys is pressed, the blue
Transmit indicator on the remote
control will light for 10 seconds:
- after 10 seconds, if no adjustment
has been made, the indicator will
go out and the Lens adjustment key
must be pressed again to resume
adjustment.
- to end the adjustment before 10
seconds has elapsed, press the
key.
- all other adjustments will be locked
out until the Lens adjustment is
ended.
Main Menu
Setup
Main Menu
Geometry
Main Menu
Image
For full details of how to use the
controls and the menu system, see
the
Operating Guide
.
