Digital Projection Lightning 30sx+m, Руководство пользователя

Страница: 63 / 96

page 4.21 105-681B January 2007
Digital Projection
LIGHTNING 30sx+m, 40sx+m
User Manual 4. Using the menus
Notes
The buttons of the Main menu
are always visible at the bottom
of the display.
To go back to a previous menu
option that is no longer visible,
call up the menu again using
the appropriate Main menu
button.
Touchscreen calibration should
not normally be necessary
except after many hours of
heavy use.
Config menu
Menu buttons...
Networking config
Detailed status
Touchscreen calibration
Reset IP addresses
Configuration menu, continued
Detailed status
Press the DETAILED STATUS button.
The Software release version and the total number of hours of operation are shown.
Touchscreen calibration
If you suspect that the LCD touchscreen has drifted out of calibration, press and
hold the
TOUCHSCREEN CALIBRATION button on the Config menu :
A target appears in one corner of the screen. Press on the centre of the target and
repeat as the target moves around the screen.
After touching all four corners, you can wait a few seconds and carry out the
calibration again, or exit by pressing the button in the centre of the screen.
Reset IP addresses
To reset these to their factory settings, press and hold the RESET IP ADDRESSES
button. The button will turn grey - hold it until it turns yellow, then release.