manualshive.com logo in svg

Digital Projection Lightning 30sx+m, Руководство пользователя, Страница: 39 / 96

Поделиться
Скачать
Digital Projection Lightning 30sx+m Скачать руководство пользователя страница 39

page 3.3       105-681B January 2007

Digital Projection 

LIGHTNING 30sx+m, 40sx+m

 User Manual

3. Getting started

Notes

Whenever you switch the lamp
on, the projector will reset
momentarily, whilst the lamp
strikes. This is to protect the
control circuitry from the effects
of the lamp strike pulse.

Any settings made before you
switched the lamp on will be
retained.

For more detailed information
about all the touch screen
menus, see the next section:
Using the menus.

Switching the lamp on

•

Press the  

LAMP 

button on the 

Main menu

..

•

Press the 

LAMP ON

 button.

The projector will reset momentarily, whilst the lamp strikes. You will not be able

to make any further settings until the Main Menu returns.

Adjusting the lamp power

Either:

•

Touch and drag the red slider up and down

OR

•

for fine adjustment, press either arrow head.

Содержание Lightning 30sx+m

































































































Отзывы:

Нет отзывов