Digital Projection HIGHlite 5000GV, Руководство пользователя

Страница: 84 / 94

6. Press and hold ENTER, then press MENU on the rear panel of the slave
projector. The POWER indicator will change to steady green and the PC Card
Access indicator will start flashing to indicate that the data is being copied from
the PC card to the slave projector. After copying data to the slave projector, the
POWER indicator will change to amber.
7. If you are triple stacking the projectors copy the data stored on the PC card to
the third projector.
LINK MODE SETTING
1. Select Projector ID from the Projector Options sub-menu on each projector and
assign a unique ID for each projector.
2. Define the same communication speed (4800 - 38400) for each projector.
3. Select Link Mode from the Projector Options sub-menu on each projector and
define one projector as the master and the rest as slaves.
4. Display an image onto the screen using all projectors and check that the image is
displayed correctly while the projectors are in link mode.
5. When a new input source is applied, adjustments to the image from the slave
projector(s) may be required (e.g. position, brightness etc.) in order to match
those of the Master projector. In order to make any adjustments first change the
Master projector from Master to Standalone mode. Next, on the slave projector,
select the same signal from the Entry List as that of the master projector. Adjust
the displayed image on the slave projectors as required and set the master
projector back to Master mode to activate the Link Mode.
6. The Link Mode adjustment procedure is now complete and the desired source
can be displayed.
D—6
Advanced User Information
ADVANCED
LBV00063; Revision A - 01/02/2000