Digital Projection HIGHlite 5000GV, Руководство пользователя

Страница: 20 / 94

Control Panel
The control panel at the rear of the projector provides all the main controls
necessary to operate the projector.
1 - Power Button
Press to turn the projector on when the projector is in the standby condition (Main
Power switch must be on and the POWER indicator lit amber). Press and hold for 2
seconds to turn off the projector.
2 - Power LED
The power indicator is a dual colour LED. When the projector is on the indicator is
green. When the projector is in standby mode the indicator is amber.
After the projector is turned off, the indicator "--" flashes for three minutes to
show that the cooling fan is working. Do not turn off the main power during that
time. After "--" stops flashing, the POWER indicator will change to a steady
amber glow and the projector will be in the stand-by mode. The main power can
then be turned off.
3 - Status LED
When the projector is used with the ISS-6020 switcher on SW1 level or SW2 level
mode, this indicator flashes when the projector is not connected with the switcher
correctly or when the switcher is turned off.
4 - Indicator Display
During normal operation the current projector ID (address) is shown in this two
digit display. In the event of an error, a projector error code will be displayed. The
display can be turned off using the ON/OFF Switch to the left hand side.
A—8
Overview
OVERVIEW
LBV00063; Revision A - 01/02/2000
8
POWER LENS SHIFT FOCUS ZOOM INDICATOR SELECT ENTER
CANCEL
STATUS
ON
OFF
MENU
- +
ON/OFF
+
7 5 4 2 Remote Sensor 9 10 11
6
1 3
✍