Digital Projection HIGHlite 5000GV, Руководство пользователя

Страница: 70 / 94

4. Select Set and press ENTER on the remote control to complete the setting. To
close, select Close.
5. To enable your setting, select Active on the Execute Switch.
6. Select OK and press ENTER on the remote control to complete the setting.
When On Timer is set and the projector is in the standby mode, the "00" display
on the INDICATOR flashes to show that On Timer program is active.
The projector must be in stand-by mode at the time of turning on. The preset power-
on time will be void if the cooling fan is working or an error occurs.
SLEEP TIMER
The Sleep Timer allows you to set the projector to automatically turn itself off after
a predefined time period.
To activate the Sleep Timer:
1. Select your desired time between 30 minutes and 2 hours in 30 minutes.
2. Select Set and press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
C—26
System Operation
OPERATION
LBV00063; Revision A - 01/02/2000
✍