Rev D July 2014
Page 6.23
Digital Projection
HIGHlite Cine 260, 1080p 330
User Manual
6. Appendix
Setting the LAN IP configuration
More detailed LAN IP configuration can be carried out using a web browser.
•
Point your browser at the projector by typing the LAN IP Address into the
address bar, then press the Enter key.
•
The embedded IP Configuration webpage should appear.
•
Set the addresses as required, then click on Save.
Notes
The default LAN IP address is
192.168.0.100
If you suspect this has been
changed, then you can find out
what it has been set to using
the remote communications
protocol Operation Command
op net.ipaddr?