Page 4.28
Rev D July 2014
4. Controlling the projector
Digital Projection
HIGHlite Cine 260, 1080p 330
User Manual
Notes
To select a different menu,
press MENU
once or
twice, so that no items are
highlighted, then use the
and
keys to select a
different page
.
To exit from the menus
completely, you may need to
press
up to three times.
Restore Defaults will restore
all settings to factory
defaults.
If you are not sure this is
what you want to do, then
either:
make a record of all settings
first
or
select
No
, then press ENTER or
SELECT
Service menu
•
To display the menus, press MENU
on the remote control or the projector
control panel.
•
Use the
and
keys to select the
Service menu
page,
The first eight items are for information only, and cannot be changed.
•
To select a menu item, use the
and
keys until the item is highlighted.
Factory Reset
•
Press ENTER or SELECT to request a Factory Reset.
The following message will be displayed.
•
Use the
and
keys to select from:
Yes
all settings will be restored to factory defaults
No
Press ENTER or SELECT to confirm your choice.
