DIGITAL-LOGIC MICROSPACE MSMVA104+, Руководство пользователя

Страница: 35 / 42

DIGITAL-LOGIC AG
M Manual V1.0C
35
6.2 Linux
This document describes how to setup the Digital-Logic M board under Linux. An example
configuration for a dualhead (DVI + CRT) setup is listed.
This has been tested with kernel version 2.6.10 and Xorg version 6.8.1. The DVI and CRT outputs of the
M board are supported by the radeon driver which is part of Xorg. TV-out is not supported.
6.2.1.1.1 Kernel configuration
Note that the following driver is only required for dualhead configuration:
Device Drivers
Character Devices
Direct Rendering Manager
ATI Radeon
Example xorg.conf file for a DVI + CRT dualhead configuration:
Section "ServerLayout"
Identifier "Dual head configuration, M (ATI M7)"
Screen 0 "ScreenDVI" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "MonitorDVI"
VendorName "Targa"
ModelName "Model"
HorizSync 28 - 80
VertRefresh 48 - 75