Digital Identification Solutions XID 8300 Скачать руководство пользователя

Страница: 55 / 64

Press

to reset the printer

Memo:

To avoid printing errors, it is recommended that you forward by one or two
images after installing the ink ribbon cassette or retransfer film cassette.

"Initializing printer when installing the cassette" (

page 21)

Unable to Fit Retransfer Film Cassette into Printer

With the printer door closed, turn on the power to cancel the
transport mode.

While in the transport mode, the retransfer film cassette cannot be
installed to the printer with the retransfer film loaded.

"Transport Mode Setting" (

page 27)

Unable to Produce Desired Printing

Results

Lines Appear on Card after Printing

"Clean the thermal head." (

page 39)

Colors on Card Appear Faded after Printing

"Clean the cleaning roller." (

page 33)

"Clean the fan filter." (

page 34)

"Clean the card feed roller/heating roller." (

page 35)

"Clean the bobbin holders." (

page 38)

Peeling Occurs on Card after Printing

Check the retransfer mode settings.

Overall Printing Quality is Poor

"Clean the cleaning roller." (

page 33)

"Clean the fan filter." (

page 34)

"Clean the card feed roller/heating roller." (

page 35)

"Clean the bobbin holders." (

page 38)

Is the printing face of the card dirty?

Use a clean card.

Card is Printed in a Single Color

Is the print setting set to single-color printing?

Is the software application setting set to single-color printing?

Check the print settings.

Strange Characters or Images are Printed

Is the driver for this printer selected on the computer?

Select the driver for this printer.

Is the USB cable connection loose?

Plug in the USB cable properly.

Retransfer cannot be Performed Successfully

Is the printing face of the card dirty?

Use a clean card.

Is the surrounding temperature or card surface temperature too
low?

Use the printer when the surrounding temperature is sufficiently high.

Is the retransfer speed setting value too high?

Set to a value that is smaller than the standard value, +2 (i.e.,
b1 and -3).

Is the temperature of the retransfer heating roller too low?

Set to a value that is larger than the standard value, +1 (i.e., +2).

Troubleshooting

Содержание XID 8300

































































Результаты поиска

Содержание XID 8300

Отзывы:

Похожие инструкции для XID 8300

Бренды по названию

Популярные бренды

Digital Identification Solutions XID 8300, Инструкция по эксплуатации

Результаты поиска

Содержание XID 8300

Отзывы:

Похожие инструкции для XID 8300

Бренды по названию

Популярные бренды