manualshive.com logo in svg

Digital Identification Solutions XID 8300, Инструкция по эксплуатации

Инструкция по использованию бесплатно доступна для скачивания с нашего веб-сайта. Продукт Digital Identification Solutions XID 8300 обладает удобным интерфейсом и передовыми технологиями. Скачайте руководство пользователя прямо сейчас, чтобы максимально эффективно использовать этот продукт.

Поделиться
Скачать
background image

Ink Run Out B2

.

v

Ink ribbon has run out.
"Replace with a new one." (

A

 page 30)

Hardware 44

.

v

A hardware failure has occurred on the printer.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

MG Mechanical AB

.

v

An error has occurred in the mechanical component of the magnetic
encoder.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

MG Hardware AC

.

v

A hardware failure has occurred on the magnetic encoder.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

Cam Error C1

.

v

A heating roller operation error has occurred.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

HR Overheat C2

.

v

The temperature of the bend remedy heating roller or retransfer
heating roller is too high.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

Hardware D8

.

v

A hardware error has occurred during initialization.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

TR Overheat F0

.

v

The temperature of the retransfer heating roller is too high.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

TR Heater F1

.

v

The retransfer heating roller is faulty.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

TR Thermister F2

.

v

The retransfer heating roller thermistor is faulty.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

RR Overheat F3

.

v

The temperature of the bend remedy heating roller is too high.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

RR Heater F4

.

v

The bend remedy unit is faulty.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

RR Thermister F5

.

v

The bend remedy heating roller thermistor is faulty.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

Overcool F6

.

v

The operating ambient temperature of the printer is too low.
Check the temperature. If the same problem recurs within the range
of operating ambient temperature, turn off the power and consult our
authorized dealers.

Head Overheat F8

.

v

The temperature of the thermal head is too high.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

Power Intrpt C3

.

v

An instantaneous interruption is detected.
Turn off and on the power again. If the same problem recurs, turn off
the power and consult our authorized dealers.

Troubleshooting

43

Содержание XID 8300

































































Отзывы:

Нет отзывов

Похожие инструкции для XID 8300

Zeka LP Programming Manual preview
LP
Бренд: Zeka Страницы: 54
Magicard Pronto Getting Started Manual preview
Pronto
Бренд: Magicard Страницы: 26
QMS 3260 Operation preview
3260
Бренд: QMS Страницы: 194
Z Corporation D4 Operation Manual preview
D4
Бренд: Z Corporation Страницы: 4
EasyThreed Mars Quick Start Manual preview
Mars
Бренд: EasyThreed Страницы: 15
Ultimaker 2 Extended User Manual preview
2 Extended
Бренд: Ultimaker Страницы: 30
Oce PlotWave 300 User Manual preview
PlotWave 300
Бренд: Oce Страницы: 340
Muratec MFX-1820 Quick Start Manual preview
MFX-1820
Бренд: Muratec Страницы: 112
Oki C911dn Supplementary Manual preview
C911dn
Бренд: Oki Страницы: 44
Ravas PR-INT-MX-RAVAS-ABLE Manual preview
PR-INT-MX-RAVAS-ABLE
Бренд: Ravas Страницы: 26
Avery Dennison 9688 Quick Installation Manual preview
9688
Бренд: Avery Dennison Страницы: 2
UVP biodoc-it 2 Installation And User Instructions Manual preview
biodoc-it 2
Бренд: UVP Страницы: 22
Kyocera FS-1118MFP Installation Manual preview
FS-1118MFP
Бренд: Kyocera Страницы: 2
Oki ML690 Manual Do Usuário preview
ML690
Бренд: Oki Страницы: 110
CognitiveTPG Blaster ADVANTAGE User Manual preview
Blaster ADVANTAGE
Бренд: CognitiveTPG Страницы: 20
Lexmark Color Jetprinter 1020 Service Manual preview
Color Jetprinter 1020
Бренд: Lexmark Страницы: 4
Canon PIXMA E300 series Getting Started preview
PIXMA E300 series
Бренд: Canon Страницы: 28
Canon MultiPASS F60 Basic Manual preview
MultiPASS F60
Бренд: Canon Страницы: 115

Бренды по названию

Популярные бренды

Загрузить еще бренды