Digital Identification Solutions XID 8300, Инструкция по эксплуатации

Страница: 19 / 64

Factory Settings
m
Media
Item Factory Settings
Ink Type -
Film Type 1000
Card Thickness Standard
m
Print
Item Factory Settings
YMC Level 0
Black Level 0
Black Mode Standard
UV Level 3
PO Level 0
m
Retransfer
Item Factory Settings
Temp Level 1
Speed (Front) 2
Speed (F-UV) 2
Speed (Back) 2
Speed (B-UV) 2
MG Peel Mode Standard
Standby Mode Front Wait
Backside Cool Off
m
Bend Remedy
Item Factory Settings
Temp Level Off
Speed 2
m
Heat Roller
Item Factory Settings
Power Saving Off
HR Control Off
m
Setting
Item Factory Settings
Display Mode Laminator State
Counter Total Cnt
Contrast 0
Buzzer On
Unit No. No.1
m
MG
Item Factory Settings
ISO Type Hico
Retry Count 1
m
Network
Item Factory
Settings
Printer Name PRINTER01
Host IF LAN
IPv4 DHCP On
Setting IP Address 192.168.0.141
Subnet Mask 255.255.255.0
Gateway 192.168.0.1
Effective IP IP Address -
IPv6 Adrs Config Auto
Setting IP Address None
Prefix Len 64
Gateway None
Effective IP IP Address 1 -
IP Address 2 -
IP Address 3 -
Session Time Out Off
Mac Address -
IPSec Mode Off
IPSec Type not Setting
Operating the Printer
19