Digital Guard Dawg iKEY-M, Руководство пользователя

Страница: 19 / 28

Begin with connection #1 the Blue / Green Lock wire . Separate the wire from the others and attach
a Quick Connect. Be sure the Quick Connect is snaped closed. Next plug the spade connector from the
#1 Blue / Green wire in the Accessory harness into the Quick Connect. Be sure the Spade connector is
full inserted. ( Pic 3 / Pic 4 ) OK, good job, just a few more to go!
Next, move on to SJB Connector #2 . Only one connection is made here, the Parking Lights.
To release the
connector there is a tab on the side that needs to be depressed, then simply wiggle and
pull it out
.
( Pic 5 ).
Make your #6 Purple / White Accessory wire connection and then replace the SJB
Connector. ( Pic 6 ). Use Zip-ties to clean up wiring and tuck wires away behind floor panels. Lastly replace
the kick panel cover.
11c – Making Accessory Connections "Continued"
Now move on to the next wire the #2 Yellow / Purple unlock wire. Repeate the process. Continue one
wire at a time until all wires 1 – 5 are connected. ***NOTE: On some year Mustangs when you get to the
#4 Green / Purple Factory Disarm wire you may find two Green / Purple wires in the #1 Connector. One
in the middle of the connector and one on the end edge of the connector. Use the one in the middle
of the connector.
Once all connections are complete, Plug the SJB #1 Connector back in and lock into
place.