Digital Guard Dawg iKEY-M, Руководство пользователя

Страница: 27 / 28

Step 17 Final Testing
Assuming you successfully completed Pre-Testing earlier. the only thing remaining is to test the
Emergency Backup card. The Emergency Backup Card can be used to enter and start the vehicle if
you should ever lose or damage tour primary Key Fobs. To use the Emergency Backup Cards, Lock the
vehicle and take the primary Key fobs 15’feet away from the vehicle and allow it to self-lock. Next hold
one of the Emergency Backup Cards directly over the Emergency Card Antenna mounted in the lower
corner of the windshield. The Emergency Card must be within 2” of the antenna. Hold the Card there
until the doors unlock about 6-10 seconds) you can now enter and start your Mustang.
Step 16: Finalizing your Start Button Installation
Begin by Test Fitting your button over the lock cylinder. The metal mounting arms should slide over the
sides og the cylinder. * Depending on the ignition switch you have , you may need to Cut and shorten
the mounting arms so the button fits flush onto the face of the cylinder. Adjust as necesssary. When the
button is ready to mount, Prepare the cylinder and switch face surface of the key hole for adhesive. It’s
a good idea to wipe with area with isopropyl alcohol and dry to assure good adhesion. Next, remove the
White layer of the adhesive backing fromthe Start Button. (Pic 1). This tape is “Pressure Activated” and
very strong once set. . Be sure to first align your button then very firmly press it onto the lock cylinder.
(Pic 2). Hold it in place for 10 seconds to allow the adhesive to activate. (Pic 3).