5
You can put more pressure on the spring construction by opening the clock and remove 0.5 mm from the
center column or the bottom housing with a small file or sand paper.
After reassembling the clock you can adjust the "feel" of the lever by tightening or loosening the center
screw. It is also a good idea to put some grease or Vaseline on the tip of the lever that touches the iron ball
or the plastic triangle on the bottom plate.
Original and filed of stand.
Sometimes it will also help to make the tip of the lever a little bit sharper with a file or sandpaper
Especially when it looks like as in the smaller picture
