1
Installation
1.1 Monitor Installation
To connect your monitor:
1. Make sure the power to the monitor and the computer is off.
2. Position the monitor and the computer so that you can easily get
to the back panel of each system.
3. Connect the BNC connectors of the cable to the R G B inputs
on the back of the monitor.
4. Connect the other end of the cable to the High Resolution Graphic
Video Card or to the back of the personal computer. If needed,
refer to your computer owner’s manual.
5. If your cable has a separate sync signals, connect these BNC
connectors to their respective BNC receptacles (HD/COMP
and
VD
) on the back of the monitor. However, if sync on green is
available, do not connect the HD/COMP and VD BNC cables.
Installation 1–1
