Specifications
3.3 Monitor Power Management System
3.3 Monitor Power Management System
This monitor has three power-saving states, indicated by the
light-emitting diode (LED) on the front panel:
Screen
Green LED
State
Power
Consumption†
Recovery Time
On
Off (On if
sync signal
is missing)
Not used
150 w (max)
-
Off
Blinks
slowly
Standby/
Suspend
< 30 watts
2 s
Off
Off
Off
< 5 watts
15 s after the
monitor is
switched off then
on again.
† These power-saving states exceed the Environmental Protection Agency (EPA)
Energy Star requirements using the Video Electronics Standard Association (VESA)
methodology for Display Power Management Signals.
Notes
1. For proper operation of this Monitor Power Management
System, make sure that the monitor signal cable is
connected to the host system and that the host system is
On.
2. The power to the monitor may be On, indicated by the
power switch being recessed, even when the LED is Off.
When not in use for extended periods, turn the monitor
Off. This reduces the power consumption to a minimum.
Specifications 3–3
