3–24
Removing and Replacing FRUs
3.4 Tilt-Swivel Base
Helpful Hint:
During normal use, the tilt-swivel base should not come
off the unit. There is a retainer plug in the center of the swivel retainer
(74-39791-01) to hold the base on. If the tilt-swivel base should come off
and the retainer teeth are not broken, you do not have to take the monitor
apart. Use the following procedure to put the tilt-swivel base back on the
monitor.
1. Place the monitor screen-side down on a soft pad.
2. Align the tilt-swivel base with the wider part downward toward the
screen (Figure 3–16).
3. Place a curved tool, like a long Allen wrench, through the center of
the swivel retainer inside the base.
4. While pressing on the base with one hand, pull the swivel retainer
toward the base until the retainer teeth click into position.
5. Install a retainer plug (74-41176-01) in the retainer to keep the teeth
apart.
