3–14
Removing and Replacing FRUs
9. Disconnect the 9-wire, 9-pin raster control cable (P6) from the
connector (J6)
1
at the top of the deflection module by pressing
the tab on top of the connector.
10. Disconnect the multicolored, 6-wire, 9-pin CRT/yoke cable (P11) from
the connector (J11)
2
on the deflection module by pressing the tabs
on the connector (Figure 3–10).
MA-0234-90.DG
1
9 - W i r e , 9 - P i n ,
R a s t e r C o n t r o l
C a b l e
2
6 - W i r e , 9 - P i n ,
C R T / Y o k e C a b l e
2
6 - W i r e , 9 - P i n ,
C R T / Y o k e C a b l e
Figure 3–10
Disconnecting Cables from the Deflection Module
