Operating the RWZ52
Identifying front panel features
The following numbers correspond to the numbers in Figure 4-1 on page
4-1.
1
Cartridge slot
Opening for inserting optical cartridge.
2
Activity indicator
Remains lit while a cartridge is loaded or unloaded,
during the powerup selftest sequence, and any time
the drive is being accessed. It also remains lit for
approximately two seconds when the eject button is
pressed.
3
Fault indicator
Remains lit whenever a failure condition exists that
keeps the drive from operating normally.
4
Eject tool opening
An access hole for the eject tool. In an emergency,
such as a power outage, the cartridge can be manually
ejected by inserting the eject tool into this opening.
Read To manually eject a cartridge on the next page.
5
Eject button
Pressed to eject the cartridge from the drive. The
cartridge does not eject if a SCSI Prevent/Allow Media
Removal command has been issued, or if power to the
drive is off.
6
Power indicator
Remains lit while the power is on.
4-2