Setting up the RWZ52
Rear panel features
Identify the following rear panel features before you connect the RWZ52
to the host system.
Figure 2-1: Rear Panel Features
1
2
3
4
5
0
1
The following numbers correspond to the numbers in the drawing on the
previous page.
1
SCSI ID switch
Used to set the SCSI ID.
2
Operation mode
switch
Used to choose the operating mode. Refer to "To set
the operation mode" on page 0-4
3
SCSI connectors
Two connectors that allow SCSI devices to be daisy-
chained. If no other SCSI device exists on the chain
after the optical drive, a terminator must be
connected to the unused connector.
4
Power connector
Connection for the power cord.
5
On/Off switch
Used to switch power on or off.
2-2
