Digital PRIORIS XL Server
Digital PRIORIS XL Server
Service Procedures
Service Procedures
MCS Logistics Engineering - Nijmegen
MCS Logistics Engineering - Nijmegen
65
65
P
R
I
O
R
I
S
X
L
Replacement Procedures
Replacing the Server Battery/Real Time Clock (RTC)
The server's battery runs the server clock and retains any setup information when it is turned off.
To replace the battery, perform the following:
1) Record server configuration settings.
2) Turn off the server.
3) Disconnect external devices, ac power, and monitor power.
4) Unlock and remove side panel.
5) Remove battery.
6) Install new battery.
7) Replace and lock side panel.
8) Connect external devices and restore power.
9) Run SCU to configure server.
Refer to
, “Configuring The Server”.
CAUTION
Make sure pin 1 on battery is correctly aligned with location on socket (see designation
A on following Figure). Incorrect installation can cause faulty server operation.
A
DEC00230-4
Figure 3 - 28 Replacing the Battery/Real Time Clock
