Digital PRIORIS XL Server
Digital PRIORIS XL Server
Utilities & Configuration
Utilities & Configuration
MCS Logistics Engineering - Nijmegen
MCS Logistics Engineering - Nijmegen
29
29
P
R
I
O
R
I
S
X
L
SCU and Setup Options
(continued)
Fields
Settings
Comments
PCI device
(8)
Enable device:
Enabled
Disabled
Device IRQ:
None
IRQ3
IRQ4
IRQ5
IRQ6
IRQ7
IRQ9
IRQ10
IRQ11
IRQ12
IRQ14
IRQ15
Enable master:
Enabled
Disabled
Latency timer
Default
Allows to individually enable or disable each PCI slot and onboard
SCSI.
Allows to individually set an IRQ default for each PCI slot
CAUTION:
Make sure the IRQ selected is not in conflict with any
main logic board resource or any expansion board.
Allows to enable or disable a PCI device that requires master
capability.
Allows to set the PCI latency timer (in PCI clocks) for each PCI
device.
(8) The options listed are applicable to onboard SCSI and PCI slots 1, 2, and 3
Hard Disk Drive 1/Hard Disk Drive 2
This option allows to disable or configure the server for the IDE hard disk drives that are installed. You
can manually select drive types or use an auto-detect feature. To use the auto-detect feature, first select
either drive types 2 and 3 or drive types 48 and 49. Once selected, you are prompted to execute the auto-
detect feature by press the
[Enter]
key.
Base Memory
The main logic board reserves the first 1024 KB of address space for server use. Base memory (640 KB) is
first assigned to the operating system. The remaining 384 KB is assigned to either shadow main logic
board BIOS, video BIOS, or for other server use.
Base memory can be modified using the 512KB-640KB mapping field.
