Digital Equipment Digital EtherWORKS 3 Turbo, Информация пользователя

Страница: 64 / 66

Power Requirements
Table B–3 lists the electrical parameters for the Digital EtherWORKS
3 Turbo boards.
Table B–3 Electrical Parameters
Board
Power
(Maximum)
DC Amps
(+5.0 V)
(Maximum) DC Amps
(+12.0 V)
(Maximum)
Bus Loads
Turbo 6.1 W 0.5 A 0.30 A 1 CMOS
Turbo TP 3.5 W 0.7 A 0.00 A 1 CMOS
Turbo PLUS – – – –
ThinWire
or TP
7.1 W 0.7 A 0.30 A 1 CMOS
Thick Wire 9.5 W 0.7 A 0.5 A 1 CMOS
PC Operating Environment
The operating environment for the Digital EtherWORKS 3 Turbo
boards is as follows.
• Temperature (at sea level): 10°C to 40°C (50°F to 104°F)
• Relative humidity: 10% to 90% (noncondensing)
• Radiated emissions: FCC Class B, VDE Class B
Caution
When adding any boards to your computer, verify that the
combined power (wattage) required for all boards in your
computer does not exceed the power supply rating. Check
your PC documentation for this information.
B–6