10
DECserver 900GM Installation
Installing Flash RAM
If you use a Flash RAM card for loading the operational software, perform the following:
1
Insert the Flash RAM card into the Flash RAM slot on the front of the
module.
a. The Digital label should be on the same side as the DECserver 900GM logo on
the front panel of the module.
b. When properly inserted, the Flash RAM card protrudes from the front panel
about 1/4 inch. The Flash RAM card is keyed and cannot be inserted
improperly.
LKG–8091-93I
The Flash RAM card can be hot swapped and may be inserted or removed at anytime.
If you are booting from the Flash RAM card, insert it before powering the module or during
the self-test phase.
Once you boot the DECserver 900GM, the card may be left in place or removed.
