3–2
Installation
Mount the repeater on a wall.
1.
Remove the back cover of the repeater (if necessary).
a.
Insert a small screwdriver into the top mounting hole on the cover.
b.
Lift the internal latch with the screwdriver, then pull the cover
away and down from the top of the repeater.
L J - 0 0 3 2 0 - T I 0
2.
Use the mounting holes on the cover to determine a position for the
mounting screws on the wall.
3.
Secure the back cover to the wall using the mounting screws.
The screws should be tight enough to to provide some resistance if
you try to remove the back cover from the wall. Do not make them so
tight that the cover is distorted or cannot be removed from the wall.
4.
Remove the back cover from the wall.