3
Installation
This chapter describes how to install the DECrepeater 90C as a
standalone unit or in a DEChub 90 Ethernet backplane. You can install a
standalone unit on a table or wall.
To install the repeater on a table or wall, see the ‘‘Standalone Installation’’
section.
To install the repeater in a DEChub 90 Ethernet backplane, see the
‘‘Backplane Installation’’ section.
Standalone Installation
To install the DECrepeater as a standalone unit on a table or wall,
perform the following procedures:
Select a location.
The location should have access to a power outlet that supplies the correct
voltage.
Place the repeater on a table.
When you pale the DECrepeater 90C on a table top, your only
requirement is to follow the environmental specifications found in
Appendix A.
3–1