Enter the number
of the slot where
the module is
installed.
12
DECrepeater 900GM Installation and Configuration
Configuring the Module (Cont.)
Start Redirect Mode
The
Start Redirect Mode
option redirects the DEChub 900 Hub Manager setup
port to the setup port of any network module that supports this function (such as the
DECrepeater 900GM) that is installed into the DEChub 900. Choosing this option
allows you to configure or obtain status of an installed network module by accessing
the specified network module’s installation menu.
After you choose
the
Start Redirect Mode
option
from the
DEChub 900
MultiSwitch INSTALLATION MENU
, the screen prompts you for a slot number
as shown in the following example.
The following example shows how to select a slot number (user response is shown in
boldface type):
Enter selection: 13
Enter the slot number for redirection (1–8): 3
Return
Setup port redirected to 3: DECrepeater 900GM
Attempting to connect ...
Connection successful!
After you press
Return
, the
DECrepeater 900GM INSTALLATION MENU
appears
on your screen. Go to the section titled DECrepeater 900GM Installation Menu
(DEChub 900 Options).