Installing and Removing Components
5-8 AlphaServer 1000 Rackmount Owner's Guide
1.
Tilt the connecting end of the module and press gently on the module so it slips over
the two posts at each end of the slot (see Figure 5–8).
2.
Reinstall any memory modules you removed for access.
3.
Replace the system covers following the procedures in "Replacing the System Unit
Covers."
4.
Test the memory configuration using these commands:
>>> show memory
>>> test memory
For more information, see the section, "Configuring Memory" in Chapter 6, "Configuring."
Figure 5–8: Installing a Memory Module
MLO-011574
1
2
