MESSAGE ENTRY
- - - - FONT- 1 S12
PRICE $ 1.29/10
The second option is to replace characters by
using the
key or moving the cursor over a
character to be replaced. When the MESSAGE
ENTRY mode is entered the cursor is placed at
the end of the line. Pressing the
key will delete
the last character on the line. Successive
’s will
continue to delete the last character on a line.
MESSAGE ENTRY
- - - - FONT- 1 S12
PRICE $
At the left the characters 1.29/10 were deleted.
MESSAGE ENTRY
- - - - FONT- 1 S12
PRICE $ 1.75/12
Enter the correct data, in this case 1.75/12.
MESSAGE ENTRY
- - - - FONT- 1 S12
PRICE $ 1.75/09
The alternative approach if just a few characters
are to change is to use the
or
to place the
cursor over the characters to be changed and
retype the correct characters. In this example the
1.29/12 WAS CHANGED TO 1.75/09.
< - - SELECT - - >
!#$&( )*+=¢
ŇẾỖ
Symbols are inserted by pressing
. When in
Message Entry mode, position the cursor where a
symbol is needed and press
. The screen will
show a line of symbols as presented on the left.
Position the cursor by pressing
or
on the
special character to be inserted and press
.
Continue to build the message or press
to
return to the Command mode.
EVSC STOPPED
HD1- - >SPEED=120
PRICE $ 1.75/12
22
EVOLUTION SC
SYSTEM MANUAL Issue 1.1 15 November 2006
