TellerScan
®
TS500 User Manual
Rev 111618
Page | 11
Testing the Scanner
Installing the Optional USB Driver
PLEASE NOTE:
Digital Check does not provide the check scanning or bank deposit software. Do not connect
the USB cable from the scanner to your PC prior to installing the drivers or the scanning application / software.
Please contact your IT department, solution provider
or the bank’s helpdesk for further assistance with
installing the driver or getting the scanning software set up or installed.
Digital Check provides only an optional driver installation utility and testing software that can be used for
troubleshooting, verifying the connection to the PC and to test the various scanner functions.
Note:
The USB driver and test software for the TS500 need to be acquired from Digital Check support. Please
call support at: (1) 847-446-2285 or email: [email protected]
Once you have the USB driver, use the following steps to complete the installation.
Step 1:
Do not connect the USB or power supply cables yet. Download or run the TellerScan USB Driver
installation file from the link provided by Digital Check support.
Step 2:
Once downloaded / saved to a local drive, double-click on the TellerScanDriver.exe file to start the
installation sequence. Follow the on-screen steps to complete the installation.
Step 3:
Connect the scanner to the PC using the USB cable, and plug in the power supply to the scanner and
electrical outlet.
✓
Windows should now detect a new hardware device.
✓
The scanner is ready to be used with a scanning application or a Digital Check test software.
Installing the TS500 Test Software
The Digital Check test software
(“ScanLiteENG”) is a basic utility that allows the user to scan and view images,
test the various scanner functions, verify the sensor status and more.
Note:
Please call support at: (1) 847-446-2285 or email: [email protected] to acquire the
ScanLiteENG test software. The instructions for installing and enabling the test software will be included with
the installation file.
