Installation & Operations Guide - SmartSource Micro Elite IJ
Rev. 022720
8227 5727-003
Page 9 of 27
Connecting cables, install ink cartridge and powering on the unit
1. Locate the power supply and AC line cord.
Note: Use only the power supply that was packed with your SmartSource Micro Elite IJ. Do not
exchange power supplies between units, or use non-Digital Check-supplied power supplies, even if
they look similar.
2. Plug the power cable connected to the power supply into the SmartSource Micro Elite IJ, and then plug the AC line
cord into the power supply-the other end into an AC outlet.
Plug into
scanner
Plug into Power
supply
