Digital Check SmartSource SSM1-MICROELITE-SEIJ, Инструкция по установке и эксплуатации

Страница: 13 / 27

Installation & Operations Guide - SmartSource Micro Elite IJ
Rev. 022720
8227 5727-003 Page 13 of 27
Status Light Indication/Function Chart
See below for Micro Elite IJ Models starting with serial # 9203XXXXX
Below is a chart for LED power button indication/function for Micro Elite models starting with serial # 9203XXXX:
LED COLOR
LED
STATE SCANNER STATE
RED SOLID
USB or Ethernet cable not connected
RED BLINKING Scanner error
RED
SLOWLY
BLINKING Application generated error
RED
RAPID
BLINKING Serious Scanner error (Cycle Power on Scanner)
BLUE
SLOWLY
BLINKING Cable is connected
BLUE BLINKING Application is connected; Scanner is Idle
BLUE SOLID Scanner is ready to scan or is Actively Scanning
BLUE
RAPID
BLINKING
1. Press power button down 6 sec. = Scanner OFF
2. Press power button down 1 sec. & Release = Motors ON (Clear Track)
PURPLE
RAPID
BLINKING
In Cleaning Mode (Press/Release Power Button 3 times to enter this
mode)
RED / PURPLE
SLOWLY
BLINKING USB or Ethernet cable not connected; Cleaning Required
PURPLE
SLOWLY
BLINKING Cable is connected; Cleaning Required
PURPLE BLINKING Application is connected; Cleaning Required
PURPLE SOLID Actively Scanning; Cleaning Required