Installation & Operations Guide - SmartSource Micro Elite IJ
Rev. 022720
8227 5727-003
Page 18 of 27
Processing ID Cards or Longer/ Taller documents
When prompted by your application, insert the ID card into the alternate entry at the front of the unit, as shown. Normally
the front of the ID card faces out as in the graphic below. The track will start, and the ID card will be fed, imaged on both
sides, and returned to the front of the unit.
The alternate entry can also be used in the same way to feed and image single paper documents which are too thick or
too damaged to be fed through the normal feed hopper and track.
Note that a MICR code line on any document fed in
this way will not be read.
Refer to your application for the correct direction to feed a document through the alternate
entry.
ID card or alternative feeder:
scans front and rear of card or
document. The front of the card
or document is at the left side as
shown. Application configures
scanner to start feeding on auto-
sense or by application start.
ID cards
