Digital Ally, Inc.
|
Introduction
1-2
DVM-800 Operation Guide
|
860-00186-00 Rev L
1.2 DVM Features Diagram
1
LCD Display:
Used for viewing video. LCD is behind the mirror and is not visible when off.
2
Internal Microphone:
Records audio from the passenger compartment.
3
Manual Record button:
This button is used to start/stop a manual event recording.
4
LED Status Indicators
(Passenger Facing & Road Facing): These visible indicators give the
operator feedback on the operational status of the DVM.
5
Infrared Illuminators:
Automatically provides Infrared illumination for the passenger
facing camera during low light conditions.
6
Integrated Passenger Facing Camera:
Records video of the vehicle passenger area.
7
Ambient Light Sensor:
Senses ambient light to automatically adjust LCD brightness.
8
Menu and Playback Buttons:
Used to navigate the DVM menus, play back videos, and log
into the system.
9
External SD Card:
A removable SD card is installed behind the external SD door. The SD
card is installed at a slight angle and positioned with the connector pads as shown above.
10
External Audio Input:
The Digital Wireless Microphone audio cable is connected here.
11
External SD Card door:
Provides access to the removable SD memory card.
12
USB Port:
For data transfer and Wi-Fi download.
13
External Camera 1 Port:
An external camera can be connected to the DVM with this port.
14
External Camera 2 Port:
A 2nd external camera is connected to the DVM here.
15
GPS Port:
The GPS antenna is connected here.
16
Power Port:
Provides power to the DVM or can be used to attach the Interface Box to the
system.
17
Reset Button:
Used to perform a hard reset of the system.
18
Integrated Road Facing Camera:
Records the view in front of the vehicle.
1
2
3
10
4
11
12
13 14 15 16
4
17
18
5
6
7
8
9
