Digital Ally, Inc.
|
DVM Operation
4-5
DVM-800 Operation Guide
|
860-00186-00 Rev L
4.7 External 12XC Camera Control Buttons
The external front facing 12XC Camera is enabled when External 1 is selected as a
camera source in the
Focus
The
NEAR
Focus button is used to move the focal point closer to the camera.
The
FAR
Focus button is used to move the focal point away from the camera.
It is recommended that
AUTO FOCUS
be set to OFF. This will prevent the camera
from focusing on items on the windshield such as bug splatter, rain drops, wiper
blades, etc.
Zoom
Each quick press and release of the
ZOOM IN
button will increase the zoom
magnification level by 1x. Press and hold to zoom in faster.
Each quick press and release of the
ZOOM OUT
button will decrease the zoom
magnification level by 1X. Press and hold to zoom out faster.
Pressing the
AUTO ZOOM
button will cause the camera to zoom in to a pre-
defined zoom level for 5 seconds, then return to a wide angle view.
Camera Select
CAM1
: Selects external front 12XC camera for recording/viewing when the front
12XC camera and back seat camera are connected together through a Y-cable.
CAM2
: Selects the external back seat camera for recording/viewing when the
front 12XC camera and back seat camera are connected together through a
Y-cable.
The camera selection can be changed at any time. Please note that the DVM records whichever
camera is selected, making it possible to switch cameras in the middle of an event record.
