Digital Ally, Inc.
|
Wireless File Transfer
7-1
DVM-800 Operation Guide
|
860-00186-00 Rev L
The DVM-800 is capable of automatically transmitting video events to your VuVault
Server when within range of an authorized wireless access point, and can wirelessly
receive firmware & configuration file updates. Any authorized user may then playback
and analyze video using the VuVault client software (consult the
“VuVault Administrator
Guide”
for more information). There are two ways to set up the DVM-800 wireless
transfer:
Basic
mode and
Advanced
mode. Decide from the description below which
mode works best for your application. Make sure your wireless access point is powered
on and connected to your network. The included Wi-Fi dongle is required for wireless
file transfer.
Basic
In Basic Wi-Fi mode, after the event files have been uploaded to the server the
DVM will delete the files from DVM’s primary memory storage. This mode provides
no extra file verification. This is the commonly used setting for most installations.
Advanced
In Advanced mode, the DVM will only delete the files from the DVM’s primary memory
after VuVault has imported and validated the files.
The wireless transfer operation is configured using the
VuVault Admin>Devices>DVM-800
Settings
tab, and the
Admin>VuVault Settings>WtmLite
tab. Refer to
configuration instructions, and the
“VuVault Wireless Server Setup Guide”
for instructions
on how to configure your VuVault server to support the wireless file transfer feature. A
Wi-Fi dongle for the DVM-800 is required.
Wireless configuration
settings (see
)
VuVault Wireless Server
configuration settings
Section 7
Wireless File Transfer
