Digital Alert Systems DASAMC, Руководство пользователя

Страница: 28 / 31

Digital Alert Systems AMS Installation /Operation & Integration Guide
Revision 3.0 Page 28 of 31
the yellow highlight in
Figure 21
). To produce text this may run stand alone, or
BTI can program it into the current broadcast weather alert transmission.
1. To configure the EW903 weather transmission, from the Transmission
Status screen click the Configure button
Figure 21. Transmission Status screen showing weather alert job EW903
2. On the Configure Job EW903 screen set the number of cycles to run the
transmission. Typically this has a value of 2 as shown in
Figure 22
.
Figure 22. BTI Configure Job EW903 screen with number of Cycles highlighted.
3. Click Save then Close buttons
4. After returning to the Transmission Status screen click the Content
button.
5. In the Maintain Transmissions page click Customize to enter the
Advanced Transmission parameters
(Continued)
The Customize section of the system contains the additional setup
parameters. The appropriate Value fields in the
Advanced Transmission
Figure 23 BTI Maintain Transmissions screen