Digital Alert Systems
AMS Installation /Operation & Integration Guide
Revision 3.0
Page 15 of 31
Setting Channels
•
AMC Configure > Channels
The Channels menu links the MultiPlayer Port with the audio
Type
or action
desired for that port. Together with MultiPlayer’s Audio Port Configuration, which
sets the audio signal, the Channels menu defines the playback manner of each
port.
Selecting/de-selecting the box in the Enabled column will turn on or of the
respective channel. When updated these changes are reflected on the
Home
page.
The
Name
field allows a channel to be labeled with the information entered here
being displayed on the Home screen, therefore it is a good idea to use a station’s
ID along with the type of channel to better understand the action a user should
expect on that channel. For example, entering WQRR-Main for the Main channel,
or WQRR-SAP for the secondary audio channel would let a user on the
Home
page
1.
Click
Configure
on the top menu bar, then the
Channels
tab. (the default values are preloaded)
When updated changes are reflected on the
Home screen as indicated in by the boxes.
2.
Selecting/de-selecting the box in the
Enabled
column will turn on or off the respective channel.
3.
Enter any descriptive text in the
Name
text box.
Best practice is to enter a station’s call letters.
4.
Using the pull-down menu select the Audio Type
– either Main or SAP. (defined in Table 1 above.)
5.
Click the
Save
button to save any changes.
