DG-BG1100N User Manual
55
4.4.3 NAT
Choose
Advanced Setup > NAT.
The page shown in the following figure appears. In this page,
you can set up the NAT (Network Address Translation) function for your ADSL router.
Beforehand, you should activate NAT function for a virtual circuit. Please
refer
to 4.3.1
Internet.
NAT is short for Network Address Translation. The Network Address Translation Settings
window allows you to share one WAN IP address for multiple computers on your LAN.
The following table describes the parameters and buttons of this page:
Field
Description
Virtual Circuit
Enter Virtual Circuit Index that you plan to setup for the NAT function.
NAT Status
This field shows the current status of the NAT function for the current
VC.
Number of IPs
This field is to specify how many IPs are provided by your ISP for
current VC. You can select Single or Multiple. When you choose
Single, you can set DMZ or Virtual Server. When you choose Multiple,
You can set DMZ, Virtual Server or IP Address Mapping (for Multiple
IP Service).
Note:
For VCs with single IP, they share the same DMZ and Virtual servers; for VCs with multiple IPs,
each VC can set DMZ and Virtual servers. Furthermore, for VCs with multiple IPs, they can
